Free Standing Racking
The most oftenly used type of racking in Automated Storage and Retrieval System are: Assembly Beam Type and Bracket Type.
The goods carrier in racking system normally are pallets (steel, wooden or plastic) and cartons/totes. To meet goods storage and retrieval in very high-density, narrow aisle space, the racking system must be manufactured and installed in deadly accurate standard.
Our upright and beam production line all is imported Germany , which able to continuously punching, roll-forming in high precision. For all the project we undertake consulting and designing, we actively carry out Finite Element Analysis and Structure in Extreme Environment Simulation ensure the racking system’s static load stability but also dynamic loading. With almost 30 years history for home and abroad racking project, all of our installation workers are internationalized and experienced.
In all, no matter from theoretical support, manufacturing, installa

Huaruide’s storage and retrieval system for boxes (MiniLoad AS/RS) adopt high dynamic value, high efficiency and energy saving driving technology, provides flexible and fast storage and retrieval for trays, turnover boxes, cases, cartons and bins.

Variations：
Bellowing 3 basic lines of stacker crane, each with different speeds and equipment on the services required.

Fork Extractor
With plate extend under load. Available in both single-deep and double-deep configurations.

Side-hook extractor
Extendable side clamps with roller conveyor. Perfect for dynamic storage of varying load sizes.

Dual stacker cranes
Two stacker cranes operate in the same aisle by dispatching system, apply for high-efficiency, multi-stations logistics systems.
Add-ons:
Frontal header
U-shaped circuit located at the end of racking. Ideal for high-frequency storage/retrieval and picking operations. Goods are replenished in this picking position

Description:
Comparing with in traditional radio shuttle system, single direction shuttle need to interface with forklift frequently, pallet four way shuttle relies on its own structure, achieves double coordinate movement. It provide a efficient, directly access solution from X and Y axis for entire layer goods’ storage and retrieval.

Through more intelligent collaboration between four way shuttle and stacker crane, the full pallets automated handling, storage and retrieval, inventorying, movement are fulfilled. Pallet four way shuttle is widely used in chain stores, e-commerce, medical, tobacco, express since it has better performance in increasing warehousing demand on storage density, space utilization, and intelligence.


Technical Features:
1. It has safety and obstacle avoidance design, it will stop and alarming when there’s foreign material or goods fell down from pallet.
2. It is high degree of automation, supporting hand-

Features:
It has Vector controlled drive system and accurate positioning, meet for high-frequently input and output requirements;
It has perfect safety refinements and fault diagnosis function;
It transmits information and monitors the entire process;
It can operate with touch screen conveniently, easy for maintenance;
Parameters:


Performance
Full loaded speed
35-45m/min


Empty loaded speed
55-60m/min


Effective working time
8h


Battery
Travelling motor power
400w


Lifting motor power
370w


Voltage
24v


Battery capacity
50-60AH


Weight
13KG


Charging time for 80% electricity at ambient temperature
5h


Charging time for fully charged at ambient temperature
8h


Battery life
At least 1000times recharge cycles


B

Huaruide as a logistics equipment manufacturer and system integrator, is pioneer in China for self-engineering and developing storage and retrieval system products. Flexible to design, manufacture, install height up to 40meters, operate in 1.5m wide aisle width with high load capacity.


With the continuous improvement and refinement, today we have wide range of cranes:
Variations：

Single Deep
Standard configuration of ASRS. One stacker crane with access to racks rows. (One on each side)
Loading: 0.5-1.5T
Height: 7- 24m
Speed: 160m/min
Heavy Duty/Extra High
Loading: 2-6T
Height: 24- 35m
Speed: 120m/min

Multi-aisle Change
Transfer in 2-3 aisles, process 4-6 rows

Double Deep
Extended fork with access to four rack rows (two on each side). Great for high-density storage of low-med throughput.

Dual Carriage
Equipped with 2 independent forks, one stacker crane with access to two pallet positio

Description:
Multishuttle is highly effective for storage, buffering and retrieve totes, cartons, trays or individual bundles. The innovative finger design of the load extractor and telescope arms allow products to be stored single deep, double deep even multi-deep. It is an efficient staging solution that provides precise load sequencing and more operational flexibility at high rates, limited space.

Goods to Person which composed of Multishuttle system, picking station and conveyors is ideal for mixed case pallet building and piece piece pick order fulfillment modules. As a piece picking technology, the goods will be transported to person for picking. GTP system can greatly improve the picking efficiency by transporting goods to person which will cut half of time occupied by walking for person to goods picking. Theoretical picking efficiency of multi-shuttles AS/RS GTP system is 300-1200 orders/person/hour. 5-10times higher than Radio Frequency Picking. Compare to t

The hoist drive the chain to make the platform reciprocating motion, control the electric motor through variable frequency speed regulating system. There is drive mechanism to let the pallet go into platform automatically. According to input and output direction, there are Z type, C type and E type. The chain speed could be 60m/min with maximum 4000kg load. Due to it can transfer materials up and down hence achieve the materials flowing in the same to two direction in a cycle, greatly improve the throughput while saving vertical transporting space.

Features:
1. Lifting Mode： friction belt type, chain type and toothed belt
2. Pallet Dimension: Available for customization
3. Lifting pallet weight: 100-4000kg (heady duty)
4. Lifting Speed: 1-60m/min
5. Occupied less space
6. Intermittent operating
7. Can be multi-layers docking
8. Belt type with less noise, pollution-free and environment friendly.

Performance Parameters:
Chain Conveyor Length Optimal plan when loading ＜1500kg
optimum length: 1800mm, 2500mm, 3000mm, 3500mm, 4000mm, 4500mm
The chain conveyor length for hoist is 1480mm
When apply for mobile chain conveyor, optimum length is 1800mm

Chain conveyor width: W=1120. C/C width 1050mm
Chain conveyor height: standard height 600mm, other dimension can be customized.
Standard speed: 11m/min or 14m/min
Structure features:
1. Adopt straight double-stand chain for supporting and delivering goods.
2. Through the adjustable bolts device on each chain to realize chain’s tension.
3. On the vertical beam there’s high strength industrial nylon/steel guide stripes for guiding and supporting, easily to disassemble or replacement.
4. Double-stand straight roller chain makes sure the pallet transportation stable.
Optional Accessories:
Brackets for the photoelectric sensors (fixed, rotary), terminal boxes, end

Rail guided vehicle is electrically powered with floor rail, it can transport pallet from chain conveyors to convenient locations for loading and unloading. According to different function, it can be divided into assembly type RGC and transport type RGV. According to different movement mode, it can be divided into Circular Orbit and Linear Reciprocating type (also called ferry cart).

The circular orbit RGV has high efficiency, allow several vehicles working in the same time. Normally adopt aluminum alloy rail. It can be peripherals for AS/RS, but also can be an independent system by itself. As peripherals for AS/RS, it can dock with other logistics system conveniently and automatically to deliver the goods on plan, such as input, output station, buffer station, conveyors, hoist or robot. In addition, it doesn’t need operator, move fast, decrease the storage cost and improve efficiency greatly.

The linear reciprocating RGV (Ferry Cart) includes one vehic